Page Title Center

Leistungsbeschreibung

Abmessungen: Dicke: 0,05 mm - 16 mm
Breite: ≥ 610 mm, 1000 mm, 4' (1219 mm), 1220 mm, 1500 mm, 2000 mm
Kundenspezifische Größe muss mit uns bestätigt werden

Lieferzustand: kaltgewalzt, warmgewalzt

Ausführung: 2B, Nr. 1, 1D, Nr. 2, Nr. 4, BA, 6K, Hochglanz, 8K, Haaransatz mit PVC

MillOrigin: TISCO, ZPSS, BAOSTEEL, JISCO, ZSESS, ATI, SMC, HAYNES, VDM, ArcelorMittal,        Outokumpu usw. 

Normen: ASTM A240, ASTM A480, JIS G4303, BS 1449, DIN17441, G4305

Eigenschaften: Helle Oberfläche, Korrosionsschutz, Hitzebeständigkeit, hohe Zähigkeit und mechanische Eigenschaften, Beständigkeit gegen Säure und Alkali, Oxidationsbeständigkeit.

Anwendungen: Chemieanlagen, Lebensmittelindustrie, medizinische Industrie, Erdöl, Energie, Haushaltsgeräte, Bauwesen, Fahrzeuge, Kochgeschirr usw.

Edelstahlbleche und -platten Spezifikation: ASTM A240 / ASME SA240
Dimensionsstandard: JIS, AISI, ASTM, GB, DIN, EN usw.
Breite: 1000 mm, 1219 mm, 1500 mm, 1800 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm usw.
Länge: 2000 mm, 2440 mm, 3000 mm, 5800 mm, 6000 mm usw.
Dicke : 4 mm bis 120 mm
Form: Coils, Folien, Rollen, Normalblech, Unterlegblech, Lochblech, Riffelblech, Streifen, Flache, Rohling (Kreis), Ring (Flansch) usw.
Oberflächenveredelung: Warmgewalztes Blech (HR), kaltgewalztes Blech (CR), 2B, 2D, BA, NR. 1, NR. 4, NR. 8, 8K, Spiegel, Kariert, geprägt, Haarlinie, Sandstrahlen, Bürste, Ätzen, SATIN (mit Kunststoff beschichtet) usw.

Spezifikation : ASTM A240 / ASME SA240
Abmessungsstandard: JIS, AISI, ASTM, GB, DIN, EN usw.
Breite: 5mm-150mm, etc
Länge: 4,00 mm-100 mm usw.
Dicke: 4 mm bis 100 mm
Form: Coils, Folien, Rollen, glattes Blech, Shim-Blech, Lochblech, Riffelblech, Band, flach, Platine (Kreis), Ring (Flansch) usw.    
Oberflächenveredelung: Warmgewalzte Platte (HR), kaltgewalztes Blech (CR), 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, Spiegel, Karo, geprägt, Haarlinie, Sandstrahl, Pinsel, Ätzen, SATIN (mit Kunststoffbeschichtung) usw.

Stainless Steel Sheets and Plates Specification : ASTM A240 / ASME SA240
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

Spezifikation von Edelstahl 202 Blechen und Platten
Edelstahlbleche und -platten Spezifikation: ASTM A240 / ASME SA240
Abmessungsstandard: JIS, AISI, ASTM, GB, DIN, EN usw.
Breite: 1250 MM / 1500 MM / 2000 MM / 04 Fuß / 05 Fuß und kundenspezifische Schnittbreite nach Anforderung
Länge: 2400 MM / 2420 MM / 6000 MM / 08 Fuß / 10 Fuß / Coil-Schnitt und kundenspezifische Schnittlänge gemäß Anforderung
Dicke : 0,6 MM BIS 80 MM DICKE
Form: Coils, Folien, Rollen, glattes Blech, Shim-Blech, Lochblech, Riffelblech, Band, flach, Platine (Kreis), Ring (Flansch) usw.
Oberflächenveredelung: Warmgewalzte Platte (HR), kaltgewalztes Blech (CR), 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, Spiegel, Karo, geprägt, Haarlinie, Sandstrahl, Pinsel, Ätzen, SATIN (mit Kunststoffbeschichtung) usw.

Spezifikation von 316LMOD / 316L UG / 724L / EN 1.4435 nahtloses Edelstahlrohr / Rohr 3000mm
Nahtloses Edelstahlrohr / Rohr Spezifikation: ASTM SA-240 / SA-213
Dimensionsstandard: JIS, AISI, ASTM, GB, DIN, EN usw.
Die meisten nahtlosen Rohrgrößen sind kaltgezogen und warmveredelt erhältlich. Die meisten Größen bis 3/4" Außendurchmesser sowohl nahtlos als auch geschweißt
Durchmesser Größe: Nahtlos - 1/2" NB bis 18" NB/Geschweißt / ERW- 1" NB BIS 16" NB/EFW - 8" NB BIS 110" NB
Form: Coils, Folien, Rollen, Normalblech, Unterlegblech, Lochblech, Riffelblech, Streifen, Flache, Rohling (Kreis), Ring (Flansch) usw.

Stainless Steel Sheets and Plates Specification : ASTM A240 / ASME SA240
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

Hastelloy Sheets and Plates Specification : ASTM B575 / ASME SB575
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

Hastelloy Sheets and Plates Specification : ASTM B575 / ASME SB575
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

Specifications : ASTM A790 / ASME SA790, ASTM A789 / ASME SA A789
Grade : UNS S31803, S32205
Size : ½”NB – 24”NB
Thickness Range : 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Outer Diameter: 6.0-630mm
Type : Seamless / ERW / Welded / Fabricated Pipes
Form : Round, Square, Rectangular, Oval, Hydraulic Etc
Length : Single Random, Double Random & Required Length
End : Plain End, Beveled End, Treaded
End Protection : Plastic Caps
Delivery Condition : Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
Inspection, Test Reports : Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports
Packing : Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests
Specials : Sizes and Specifications other than above can be manufactured on request

Specifications : ASTM A790 / ASME SA790, ASTM A789 / ASME SA A789
Grade : UNS S31803, S32205
Size : ½”NB – 24”NB
Thickness Range : 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Outer Diameter: 6.0-630mm
Type : Seamless / ERW / Welded / Fabricated Pipes
Form : Round, Square, Rectangular, Oval, Hydraulic Etc
Length : Single Random, Double Random & Required Length
End : Plain End, Beveled End, Treaded
End Protection : Plastic Caps
Delivery Condition : Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
Inspection, Test Reports : Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports
Packing : Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests
Specials : Sizes and Specifications other than above can be manufactured on request

Specification of Stainless Steel 202 Seamless Welded Pipes And Tubes

Stainless Steel Pipe Specification : ASTM A312, A358 / ASME SA312, SA358
SS Tube Specification : ASTM A213, A269, A249, A511, A554 / ASME SA213, SA269, SA249, SA511, SA554
Pipe Size : 1/8” NB to 24” NB, 1/4” OD to 24” OD sizes.
Tube Size : 1/2" OD to 8" OD.
Thickness Range : 0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS
Type : Seamless / ERW / Welded / Fabricated Pipes
Form : Round, Square, Rectangular, Oval, Hydraulic Etc
Length : Single Random, Double Random & Required Length
End : Plain End, Beveled End, Treaded
End Protection : Plastic Caps
Outside Finish : 2B, No.4, No.1, No.8 Mirror Finish for Stainless Steel Pipes, Finish as per customer Requirements
Delivery Condition : Annealed and Pickled, Polished, Bright Annealed, Cold Drawn
Inspection, Test Reports : Mill Test Certificates, EN 10204 3.1, Chemical Reports, Mechanical Reports, PMI Test Reports, Visual Inspection Reports, Third Party Inspection Reports, NABL Approved Lab Reports, Destructive Test Report, Non Destructive Test Reports
Packing : Packed in Wooden Boxes, Plastic Bags, Steel Strips Bundled, or as per Customers Requests
Specials : Sizes and Specifications other than above can be manufactured on request